Engraving machine guide how to maintain
Engraving machine is a CNC machine tool widely used in industrial automation, different processing, but also need to do a good job in the machine tool itself self-maintenance function, so we in the engraving machine after the use of maintenance is an essential factor.
Engraving machine in operation should pay attention to prevent chips, abrasive particles or cutting fluid scattered on the surface of the guide, or it will cause increased wear guide, abrasion and corrosion. Therefore, it is necessary to pay attention to the normal inspection of guide rail protection equipment to ensure the protection of the guide rail.
Usually the guide rail is smooth, reduces the friction resistance and the friction wear, in order to prevent the low speed creeping and reduces the high temperature when the temperature. Normally guide way chooses lubricants and colophony oil, undertake daily protection and maintain, we should notice to look in operating use, if it breaks out, can cause guide to wear away. Must do every day to check the guide rail smoothness, if the oil is not enough, it should be timely increase the lubricating oil; At the same time to check whether the pump can start and stop? Can you supply lubricating oil?
Engraving machine maintenance to do the following:
1, first of all, the maintenance of the engraving machine is to start from the beginning of the installation, processing products should be done every day after the cleaning of the machine tool and the work of the guide rail protection.
2, daily maintenance is an important part of the maintenance work. Every day to do in the work of the clean, clean machine tool, all aspects of the machine tool should be under normal circumstances to start work, in use should pay attention to the cutting fluid in a timely manner of the unobstructed drainage. After the end of the work must clean the machine tool on the workpiece scrap, also need in the process of operation in accordance with the provisions of the timely refueling machine parts.
3, regular maintenance is an essential factor in the engraving machine, every month or two months to the engraving machine for a thorough maintenance.
Although this will be very troublesome, but usually pay attention to the details every day and to solve, do these maintenance is very easy to do.